A Novel Generic Framework for Track Fitting in Complex Detector Systems

This paper presents a novel framework for track fitting which is usable in a wide range of experiments, independent of the specific event topology, detector setup, or magnetic field arrangement. This goal is achieved through a completely modular design. Fitting algorithms are implemented as interchangeable modules. At present, the framework contains a validated Kalman filter. Track parameterizations and the routines required to extrapolate the track parameters and their covariance matrices through the experiment are also implemented as interchangeable modules. Different track parameterizations and extrapolation routines can be used simultaneously for fitting of the same physical track. Representations of detector hits are the third modular ingredient to the framework. The hit dimensionality and orientation of planar tracking detectors are not restricted. Tracking information from detectors which do not measure the passage of particles in a fixed physical detector plane, e.g. drift chambers or TPCs, is used without any simplifications. The concept is implemented in a light-weight C++ library called GENFIT, which is available as free software

Tracking Study of the Effect of BPM Impedances in the SPS

Following the observation of a Transverse Mode Coupling Instability (TMCI) in the SPS [1, 2], a systematic estimate of the impedance of the various pieces of equipment installed in the machine has started. In this report the contribution of the Beam Position Monitor trapped modes to the global transverse impedance is considered. The trapped modes have been thus calculated with MAFIA and characterized with their resonator parameters. These impedances have been subsequently fed into the MOSES and HEADTAIL codes in order to evaluate the expected TMCI threshold in the SPS and compare it with the experimental observations

A Novel Highly Symmetric TM01 Mode Launcher for Ultimate Brightness Applications

The R&D of high gradient radiofrequency (RF) devices is aimed to develop innovative accelerating structures based on new manufacturing techniques and materials in order to construct devices operating with the highest accelerating gradient. Recent studies have shown a large increase in the maximum sustained RF surface electric fields in copper structures operating at cryogenic temperatures. These novel approaches allow significant performance improvements of RF photoinjectors. Indeed the operation at high surface fields results in considerable increase of electron beam brilliance. This enhancement requires high field quality in the RF photoinjector and, specifically in the design of the power coupler. In this work we present a novel device for the RF photoinjector: a compact X-band TM01 mode launcher with a fourfold symmetry which minimizes both dipole and quadrupole RF components

The Ka-band high power klystron amplifier design program of INFN

In the framework of the Compact Light XLS project, a short ultra-high gradient linearizer working on the third harmonic of the main linac frequency is requested. Increasing gradients and reducing dimensions are requirements for XLS and all next generation linear accelerators. Actually, ultra-compact normal conducting accelerating structures, operating in the Ka-band are required to achieve ultra-high gradients for research, industrial and medical applications, with electric field ranging from 100 to 150 MV/m. To fulfill these strong requirements, the R&D of a proper Ka-band klystron with high RF power output and a high efficiency is mandatory. This contribution reports the design of a possible klystron amplifier tube operating on the 010 mode at 36 GHz, the third harmonic of the 12 GHz linac frequency, with an efficiency of 42% and a 20 MW RF power output. This contribution discusses also the high-power DC gun, the beam focusing channel and the RF beam dynamics

Progress on the hybrid gun project at UCLA

UCLA/INFN-LNF/Univ. Rome has been developing the hybrid gun which has an RF gun and a short linac for velocity bunching in one structure. After the cavity was manufactured at INFN-LNF in 2012, tests of the gun was carried out at UCLA. The field in the standing wave part was 20 % smaller than the simulation but the phase advance was fine. The cavity was commissioned successfully up to 13 MW. The beam test was performed at 11.5 MW and demonstrated the bunch compression

Electron cloud buildup and impedance effects on beam dynamics in the future circular e+e− collider and experimental characterization of thin TiZrV vacuum chamber coatings

The Future Circular Collider FCC-ee is a study toward a high luminosity electron-positron collider with a centre-of-mass energy from 91 GeV to 365 GeV. Due to the beam parameters and pipe dimensions, collective effects and electron cloud can be very critical aspects for the machine and can represent the main limitations to its performance. An estimation of the electron cloud build up in the main machine components and an impedance model are required to analyze the induced instabilities and to find solutions for their mitigation. Special attention has been given to the resistive wall impedance associated with a layer of nonevaporable getter (NEG) coating on the vacuum chamber required for electron cloud mitigation. The studies presented in this paper will show that minimizing the thickness of this coating layer is mandatory to increase the single bunch instability thresholds in the proposed lepton collider at 45.6 GeV. For this reason, NEG thin films with thicknesses below 250 nm have been investigated by means of numerical simulations to minimize the resistive wall impedance. In parallel, an extensive measurement campaign was performed at CERN to characterize these thin films, with the purpose of finding the minimum effective thickness satisfying vacuum and electron cloud requirements

Updates on the INFN High Power Ka-band klystron amplifier design program

In the framework of the "Compact Light XLS" project, a short ultra-high gradient linearizer working on the third harmonic of the main linac frequency is requested. Increasing gradients and reducing dimensions are requirements for XLS and all next generation linear accelerators. Actually, ultra-compact normal conducting accelerating structures, operating in the Ka-band regime ranging from 100 to 150 MV/m are required to achieve ultra-high gradients for research, industrial and medical applications. To fulfill these strong requirements, the R&D of a proper Ka-band klystron with RF power output and a high efficiency is mandatory. This contribution reports the design of a possible klystron amplifier tube operating on the TM010 mode at 36 GHz, the third harmonic of the 12 GHz linac frequency, with an efficiency of 42% and a 20 MW RF power output. This contribution discusses also the high-power DC gun, the beam focusing channel and the RF beam dynamics